Connect Cisco Catalyst 3750 Series Switches to Network

Cisco Catalyst 3750 series switches are widely used in today’s access layer of the network, which can provide Ethernet speed of Gigabit. There are a variety of configurations in this series of Cisco switches. They can fit different applications and offering forward data rates from 32G to 128G by using Cisco StackWise technology. It is an economical solution to many midsize enterprises and office. However, to make full use of these switches, how to connect them to network becomes very important. This post will illustrate Cisco Catalyst 3750 series switches connection in details.
Do You Know Cisco Catalyst Series Switches?
The ports on switches decide what types of connectors and cables can be connected with the switches. Thus, let’s get a close look at Cisco Catalyst 3750 switches ports details first. As mentioned, one of the biggest advantages is that Cisco Catalyst 3750 can support Cisco StackWise technology. Up to nice physical Catalyst 3750 switches can be interconnected into one logical switch with a high performance of 32G or 128G. This is largely depending on the StackWise ports on the rear panel of the switch as shown in the following picture.
Another great advantage of Cisco Catalyst 3750 switch is its great flexibility and adaptability owning to its various configurations. The Ethernet ports of Cisco Catalyst 3750 can support data rage from 10M to 1G. For instance, or example, Cisco Catalyst 3750G-12S contains 12 SFP ports, Cisco Catalyst 3750G-24TS-1U has 24 Ethernet 10/100/1000 ports plus 4 SFP uplinks in 1 rack unit (RU) height, Cisco Catalyst 3750G-48PS is armed with 48 Ethernet 10/100/1000 ports with IEEE 802.3af PoE and 4 SFP uplinks. The following picture shows the detailed ports information of Cisco Catalyst 3750G-48TS, which has 48 Ethernet 10/100/1000 ports and 4 SFP uplinks.
Connecting Cisco Catalyst 3750 Series Switch to Network
There are mainly two types of ports on Cisco Catalyst 3750 switches: RJ45 and SFP. Different cables and connectors are used to connect the switches to network. The following will offer detailed information about how to connect these ports.
Cisco Catalyst 3750 Switch 10/100/1000 Ports Connection
10/100/1000 Ports on Cisco Catalyst 3750 are RJ45 ports, which should be connected with copper cables (as shown in the following picture). For different applications, the cable types are also different. For example, when connecting Cisco Catalyst 3750 to workstation, servers, router, the straight-through cables are suggested to use with RJ45 connector. When it the switch is connected to repeaters, crossover cable is recommended. When connecting to 1000Base-T-compatible devices, be sure to use a twisted four-pair, Cat5 cable.


Cisco Catalyst 3750 Switch SFP Module Ports Connection
Most Cisco Catalyst 3750 switches have several SFP ports on their front panel. They can support Gigabit Ethernet, by using SFP modules related. Both copper and fiber optic links can be built with these ports and SFP modules. If connected with fiber optic 1000Base-LX or 1000Base-SX SFP modules a link supporting Gigabit Ethernet based on fiber optic can be built. If connected with copper SFP module like 1000Base-T, a copper link will be built. The following picture illustrates the connections with fiber optic SFP module port and Copper SFP module port from left to right separately.
Cabling Solution for Cisco Catalyst 3750 Series Switches
More related cables and modules that Cisco Catalyst 3750 switches supporting are listed in the following chart for your reference.
Port Type
Data Rate
Connectors/Modules & Cables
RJ45 Ports10BASE-T ports RJ-45 connectors, two-pair Cat 3, 4, or 5 unshielded twisted-pair (UTP)
10BASE-T PoE ports
 RJ-45 connectors, two-pair Cat 3, 4, or 5 UTP cabling power pins 1, 2 (negative)
 and 3, 6 (positive)
100BASE-TX ports RJ-45 connectors, two-pair Cat 5 UTP
100BASE-TX PoE ports
 RJ-45 connectors, two-pair Cat 5 UTP, power on pins 1, 2 (negative) and
3, 6 (positive)
SFP Ports100MGLC-GE-100FXLC duplex, MMF
GLC-FE-100FX
GLC-FE-100LXLC duplex, SMF
GLC-FE-100BX-DLC simplex, SMF
GLC-FE-100BX-U
1GGLC-SX-MMLC duplex, MMF
GLC-SX-MMD
SFP-GE-S
GLC-EX-SMDLC duplex, SMF
GLC-LH-SM
GLC-ZX-SM
SFP-GE-Z
SFP-GE-L
CWDM SFP
DWDM SFP
GLC-BX-ULC simplex, SMF
GLC-BX-D
GLC-TRJ-45, Cat 5
All the above mentioned products are fully tested in FS.COM Test Center. Please contact sales@fs.com for more details.

评论

发表评论

此博客中的热门博文

What Is VLAN Switch and Why Do We Need It?

图片
VLAN or virtual LAN is a type of LAN that is defined to map workstations based on everything except for geographic location. It develops when the network has increased in size and complexity, and many companies require more access ports or a network design. Basically, it’s a networking technology which allows the network to be segmented logically without geographic restrictions. But how much do you know about VLAN switch? What Is  VLAN Switch? VLAN switch is built on the fiber optic switch  of LAN, which realizes the division and management of logical working group as a software. As defined in IEEE standard 802.1Q, VLAN switch can provide a way to transform one network into multiple broadcast domains. And each broadcast domain is usually matched with IP subnet boundaries, so that each subnet has its own VLAN. Therefore, users can obtain various wired LANs for different purposes that are co-existed physically, which means you don’t need to buy additional hardware or c...
阅读全文

Differentiate the 3 Technologies: Switch Stacking vs Cascading vs Clustering

图片
When we have more than one switches on hand we often seek to a better way in making use of them and managing them. There are mainly three technologies that we might use when we interconnect or combine several switches together, which are switch stacking, cascading and clustering. For many people that firstly get in touch with these terms, they can’t figure out the differences between them. Some discussions of the switch stacking versus switch clustering and switch stacking versus switch cascading have been put forward, but a comprehensive comparison between them has not been made. So this post is a discussion of switch stacking vs cascading vs clustering. Switch Stacking vs Cascading vs Clustering The comparison of switch stacking, cascading and clustering should be based on knowing the meaning of these technologies. So firstly we will see what switch stacking, cascading and cluster are. What Are Switch Stacking, Cascading and Clustering? Switch stack...
阅读全文

Nylon Zip Ties vs Hook-&-Loop (Velcro®) Ties

图片
The confinement system is the last but critical part of the entire cable management systems. Cable tie plays a very important role in this part. However, there are various types of cable ties in the market. Which one is better? Since nylon zip ties and hook-&-loop (Velcro®) ties are most common and controversial. This tutorial will compare these two types of cable ties in details. Overview of Cable Ties Cable ties are cheap and simple components used in cable confinement system. They are usually the last measure to ensure the cable managed in order. Cable ties are available in a variety of sizes and materials for use on different applications with different requirements. In addition, there are various of color options for cable ties. These color codes help users to manage the cabling and achieve easy troubleshooting. The most commonly used formats of cable ties are nylon zip ties and hook-&-loop (Velcro®) ties, as the Figure 1 & 2 shown: Figure 1. Drawin...
阅读全文