100G Transceivers and Cables Solution

FS.COM provides a full range of copper cables and optical transceivers for 100GbE, compliant to the IEEE standards. FS.COM offers QSFP28 to QSFP28 copper cables and active optical cables, to enable short reach options, as well as a wide range of optical transceivers in CFP, CFP2, CFP4 and QSFP28 form factors for various fiber types and reach requirements.
IEEE 100G Standard Overview
100 Gigabit Ethernet (100GbE) is the computer networking technology for transmitting Ethernet frames at rates of 100 gigabits per second (100 Gbit/s). The technology was first defined by the IEEE 802.3ba-2010 standard. The 100 Gigabit Ethernet standards encompass a number of different Ethernet physical layer (PHY) specifications. A networking device may support different PHY types by means of transceiver modules. Optical modules are not standardized by any official standards body but are in multi-source agreements (MSAs). The mainly used 100G standards are displayed in the table below:
StandardSupported Distance
100GBASE-CR4Up to 7m over twinax copper cable
100GBASE-CR10Up to 7m over twinax copper cable
100GBASE­SR4Up to 70m over Parallel OM3 Multi­mode fiber and 100m over parallel OM4 Multi­mode fiber
100GBASE­SR10Up to 100m over Parallel OM3 Multi­mode fiber and 150m over parallel OM4 Multi­mode fiber
100GBASE-CWDM4Up to 2km over Single­mode fiber
100GBASE-LR4Up to 10km over Single­mode fiber
100GBASE­ER4Up to 40km over Single­mode fiber
FS.COM 100G Transceivers and Cables Meet the 100G Standards
FS.COM provides 100G QSFP28 transceivers, with SR4 and LR4 versions, which are ideal choice for today’s high-density data center 100G interconnection. The SR4 version supports up to 70 m on OM3 MMF and up to 100 m on OM4 MMF. The LR4 version supports up to 10 km on SMF. Besides, FS.COM also provides 100G CFP/CFP2/CFP4 transceivers, all with LR4 versions. They are designed for use in 100G Ethernet links over single-mode fiber, supporting supports a link length of 10 km. From CFP to CFP4, the size becomes more and more compact to meet the high-density demands. 100G QSFP28 to QSFP28 twinax copper cables and active optical cables are also offered in FS.COM. The table below summarizes the FS.COM 100G transceivers and cables and the associated industry standards:
Product NumberDescriptionAssociated Industry Standard
QSFP28-SR4-100GQSFP28 Transceiver, up to 100 mIEEE 100GBASE­SR4
QSFP28-LR4-100GQSFP28 Transceiver, up to 10 kmIEEE 100GBASE­LR4
CFP-LR4-100GCFP Transceiver, up to 10 kmIEEE 100GBASE­LR4
CFP2-LR4-100GCFP2 Transceiver, up to 10 kmIEEE 100GBASE­LR4
CFP4-LR4-100GCFP4 Transceiver, up to 10 kmIEEE 100GBASE­LR4
QSFP28-100G-DAC100G QSFP28 to QSFP28 DACIEEE 100GBASE­CR4
QSFP28-4SFP28-DAC100G QSFP28 to 4 SFP28 DACIEEE 100GBASE­CR4
QSFP28-100G-AOC100G QSFP28 to 4 SFP28 AOCIEEE 100GBASE­SR4, with pre­terminated cables
Cable Types Needed for 100G Transceivers
At present, there are three cables types used for 100G transceivers. 24 fiber MTP cable for 100GBASE-SR10 transceivers, 12 fiber MTP cable for 100GBASE-SR4 transceivers and LC cable for 100GBASE-CWDM4, 100GBASE-LR4 and 100GBASE-ER4 transceivers. Below table details the connector type of each FS.COM 100G transceiver and the cable type to be used:
Product NumberFiber Type to be used
QSFP28-SR4-100GMTP­12 Multimode Fiber OM3 or OM4
QSFP28-LR4-100GDuplex LC Single­mode Fiber
CFP-LR4-100GDuplex LC Single­mode Fiber
CFP2-LR4-100GDuplex LC Single­mode Fiber
CFP4-LR4-100GDuplex LC Single­mode Fiber
100G Direct Cabling Solutions
For 100G short direct cabling, we can use 100GBASE-SR4 QSFP28 transceivers or 100G QSFP28 to QSFP28 cables. Among, 100G QSFP28 to QSFP28 direct attach copper cable can support up to 5m and 100G QSFP28 to QSFP28 active optical cable can support up to 10m. 100GBASE-SR4 QSFP28 transceivers can support up to 70 m and 100 m respectively on OM3 and OM4 12 fiber multimode MTP cable.
Fs qsfp28-cable.jpg
For 100G long direct cabling, we can use 100GBASE-LR4 transceivers. 100GBASE-LR4 QSFP28, CFP, CFP2 and CFP4 can all support up to 10km on single-mode LC patch cables. You can choose the right 100GBASE-LR4 transceivers according to your switch port type.
Fs 100gbase-lr4-qsfp28-cfp.jpg
100G Breakout Cabling Solutions
Just like the 40GBASE-SR QSFP+ transceiver can be connected to 4 10GBASE-SR SFP+ transceivers, the 100GBASE-SR4 QSFP28 transceiver can also be connected to 4 25GBASE-SR SFP28 transceivers. Like the 40G to 10G application, we also just need a 12 fiber MTP to 4 LC breakout cable.
Fs 100gbase­sr4-qsfp28-25g-sfp28.jpg
Besides the transceivers, there also exists 100G QSFP28 to 4 SFP28 direct attach copper cables designed for 100G breakout cabling applications. This cable provides connectivity between system units with QSFP28 port on one side and up to four different SFP28 ports on the other. The cable connects data signals from each of the 4 copper pairs on the QSFP28 end to the single pair of each of the SFP28 ends, which enables higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.
Fs qsfp28-to-sfp28-cable.jpg
Data center 100G optics market is accelerating. 100G transceivers and 100G direct attach cable assemblies are becoming more and more widely deployed in data center. FS.COM 100G transceivers solution include 100GBASE-SR4 QSFP28 and 100GBASE-LR4 QSFP28, CFP, CFP2 and CFP4. FS.COM 100G direct attach cables solution include 100G QSFP28 to QSFP28 copper cable and active cable and 100G QSFP28 to 4 SFP28 copper cable. Besides, single-mode or multimode MTP and LC patch cables for 100G transceivers are also provided in FS.COM. All with competitive prices, superior quality and high compatibility. For more information, please contact us over sales@fs.com.

评论

此博客中的热门博文

What Is VLAN Switch and Why Do We Need It?

Differentiate the 3 Technologies: Switch Stacking vs Cascading vs Clustering

Nylon Zip Ties vs Hook-&-Loop (Velcro®) Ties